The new vectorial driver VECTOR 15 has been designed by using the most updated electronic components. 

The micro controller and the DSP of the Texas Ins. belong to the last generation devices and have very high power of calculation. 

Moreover the use of these components minimizes the number of components with the advantages of getting reduced dimensions and an increased reliability et lower costs.

The last generation of IGBT offers high quality performances and great reliability. 

Advantages:

- bookshelf design easily installed in boxes;

- high and dynamic performances of the driver with speedy and precise torque control;

- RS232, RS422 o RS485 serial control is available;

- control panel display and keyboard of very easy use;

- integrated monitoring for easy identification of system faults;

- handling of the pre-set speed profiles by keyboard or terminal box;

- custom executions for particular requests are available.

Features:

Control system: sinusoidal PWM system with sensorless vectorial control.

Frequency: da 0,2 a 400 Hz

Acceleration / deceleration time: different levels are available according to the needs, range from 0,1 a 3600 sec.

Facilities: current limitation; reset of the default data; restart after blackout

Protections: over current; over voltage, under voltage; overheating; motor overloadind; short circuit between phase and phase and between phase and ground; inverter overloading.

Input signals: potentiometer from -10a +10 Volt for the control; possibility to select forward and backward rotation; different acceleration and deceleration levels; inertial stop; external stop and reset.

Output signals: on request; open collector signal.

Indications: display 7 lines of 5 digits and led indicators

Keyboard: 6 functional key

Data: supply: three phases 400VAC; power  15KVA; operating temperature from -10°C a +50°C; humidity from 20% a 90%; environment: indoor-type.